Text Size

ここから本文になります。

Connectors for LCDsGB-E type

GB-E type Inter-Connector is a compression type, which consists of gold-plated wires lined in the conductive part and of insulating silicone rubber on both sides. This type connector makes stable connection possible with lower resistance. GB-E type could replace soldering and also be used for PCBs, which need current capacity.

Dimension and tolerance

Item   Unit GB-E type
Pitch P mm 0.05+0.03/-0.01 0.1±0.05 0.2±0.05
Length L mm

2.0~25.0±0.2
50.1~80.0±0.5
120.1~150.0±1.0
200.1~250.0±1.6

25.1~50.0±0.3
80.1~120.0±0.8
150.1~200.0±1.3

Height H mm 1.0~5.0±0.1  5.1~10.0±0.15  10.1~20.0±0.2
Width W mm 1.0~2.4±0.1  2.5~4.0±0.15
Filament diameter   μm 30 40 40
  • ※Special design is available on request.
  • ※HW/2

Outline dimensions

Basic properties

Item Unit Values
Contact resistance ※ Ω ≦0.1
Current carrying capacity mA 500
Insulation resistance (DC 500V) 1 x 103
Operationg temperature range ºC -25~85

※The test is carried out with Shin-Etsu's own method.

Compression curves

  • ※Sample size
    0.1P x 10.0L x 2.0H x 1.0W
  • ※Inner diameter of holder
    1.0H x 1.0W

  • ※Sample size
    0.1P x 50.0L x 1.0H x 1.0W
  • ※PCB used
    2.0P, 1.0mm-width gold-plated electrode

Note

Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.

Catalog

Download

Adobe Reader is required to viewing PDF files.
Please click the Adobe logo and download Adobe Reader if necessary.
Adobe Systems, Adobe Reader and Adobe logo are registered trademarks of Adobe Systems Incorporated.

Please feel free to contact us
if you have any inquiries regarding our products.

Contact Us

pagetop