Inspection of semiconductor/electrical devicesAF type
This is an anisotropic conductive sheet with conductive carbon fibers aligned in the direction of the insulating silicone thickness. Due to its extreme thinness the sheet can connect to an opposite electrode with no open areas, the punching process giving it its free form.
Dimension and tolerance
|Sheet thickness (T)||mm||0.2±0.05 0.3±0.05|
|Diameter of the metal fiber||µm||3~20|
|Length (L)||mm||1.0~170.0 *|
|Width (W)||mm||1.0~170.0 *|
※ AF-type: Over 170L x 170W available on request.
Shin-Etsu Inter-Connector has been registered in European Community, TM No. 000299016, and in the United States of America, TM No. 2078941.
|Shore hardness A||HS (JIS A)||65~73|
|Compression set *1)||%||30~35|
|Contact resistance *2)||Ω/mm2||≦10|
|Insulation resistance (DC 500V) *3)||MΩ||1 x 103≦|
|Dielectric breakdown voltage||kV/mm||23~27|
|Operating temperature range||ºC||-25~85|
- 3000 hrs, test at room temperature
- by 4-terminal method (current applied 1-10mA), calculated by minimum electrode's area of connection characteristics.
- DC 500 V is charged at the area between minimum electrodes of connection characteristics (as stated in the annexed paper).
Compression load-compressibility curves
0.20t x 10 x 50
Resistance-electrode area curves
0.2mm-width AF type is used.
(Measured by gold-plated electrode)
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.
- Adobe Reader is required to viewing PDF files.
Please click the Adobe logo and download Adobe Reader if necessary.
Adobe Systems, Adobe Reader and Adobe logo are registered trademarks of Adobe Systems Incorporated.
Please feel free to contact us
if you have any inquiries regarding our products.