JC type | Heat-seal connectors

JC type Inter-Connector is a heat seal connector that is made up of a polyester film as a substrate, and carbon conductive lines printed on the film. JC type is coated with an anisotropic conductive adhesive. JC type is useful for LCD's applications.

Products catalog (PDF: 1,112KB)

 

Outline dimensions

Page Top

Dimension and tolerance

Item Unit Standard
Size L x H mm 100 x 400
Dimension tolerance Length (L) mm ±0.25
Height (H) ±0.25 (10H120), ±0.5 (120<H200), ±1.0 (200<H400)
Width of conductor (Tc) mm 0.25
Pitch tolerance   ±0.05 (P<1.0)±0.10 (P1.0)
Accumulative pitch (TP) mm ±0.1 (TP100)
Thickness of base film (T) µm 25
Pitch (P) mm 0.5
Thickness of cover film (option) µm 12 or 25

Page Top

Construction

Base film Polyester
Conductive lines Thermosetting resin carbon ink
Adhesive Carbon particles
Thermoplastic synthetic rubber adhesive
Insulation layer Printed themoplastic synthetic rubber

Page Top

Basic properties

Item Properties Conditions
Condutive resistance 100Ω/ 10~30ºC, 30~80%RH
Insulation resistance 100MΩ 10~30ºC, 30~80%RH
Peel strength 2.94N/cm 90°peel, 100 mm/min.
Storage time 6 months max. Sealed, 0~40ºC, RH50%

Page Top

Bonding conditions range

Adhesive temperature (1) 110~130ºC
Pressure 2.0±0.5MPa
Time (2) 5±2sec.

(1) This temperature should be applied only to the bonding area.
(2) Time (2) means keeping one at reaching the adhesive temperature (1)
* Surface should be free of dust and contamination.
* Above "BONDING CONDITION" is not specification. It is only condition which are got in our test. Your proper condition depends on heatsealing machine, material of jig, thichness and material of cushion, size and material of adherent, environment in your process and so on. Evaluation in your process should be necessary by yourself.
* The test is carried out with Shin-Etsu's own method.
* The above conditions are provided only for reference and are based upon our company's in-house tests. Applicable conditions will vary depending on the thermal capacity of equipment, cushioning material, thickness, adhesive body size, material, exoergic properties of the lower supporting jig, and a variety of other environmental factors. As such, the above conditions should be used only for reference and implemented only after thorough testing.

Page Top

Note)
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.

Products catalog (PDF: 1,112KB)

 

Page Top