GB-E type | Metal contact connectors

GB-E type Inter-Connector is a compression type, which consists of gold-plated wires lined in the conductive part and of insulating silicone rubber on both sides. This type connector makes stable connection possible with lower resistance. GB-E type could replace soldering and also be used for PCBs, which need current capacity.

Products catalog (PDF: 978KB)

 

Outline dimensions

Page Top

Dimension and tolerance

Item   Unit GB-E type
Pitch P mm 0.05+0.03/-0.01 0.1±0.05 0.2±0.05
Length L mm 2.0~25.0±0.2
50.1~80.0±0.5
120.1~150.0±1.0
200.1~250.0±1.6
25.1~50.0±0.3
80.1~120.0±0.8
150.1~200.0±1.3
Height H mm 1.0~5.0±0.1    5.1~10.0±0.15    10.1~20.0±0.2
Width W mm 1.0~2.4±0.1    2.5~4.0±0.15
Filament diameter   µm 30 40 40

* Special design is available on request.
* HW/2

Page Top

Basic properties

Item Unit Values
Contact resistance * Ω 0.1
Current carrying capacity mA 500
Insulation resistance (DC 500V) 1 x 103
Operationg temperature range ºC -25~85

* The test is carried out with Shin-Etsu's own method.

Page Top

Compression curves

Sample size: 0.1P x 10.0L x 2.0H x 1.0W
Inner diameter of holder: 1.0H x 1.0W

Sample size: 0.1P x 50.0L x 1.0H x 1.0W
PCB used: 2.0P, 1.0mm-width gold-plated electrode

Page Top

Note)
Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.

Technical information

Easy assembly/Random connection
Shin-Etsu Polymer will introduce our random connection technology by Movie.
It realizes the high reliability by many connecting points.

Products catalog (PDF: 978KB)

 

Page Top