Z-axis zebra type inter-connector is made of conductive silicone rubber. Sandwich between target device and PCB will make a reliable inter-connection. Along with well established carbon type connector, with addition of metal particle type conductive silicone used by MS and MG type offer lower resistance than that of carbon type inter-connector.
		To inquire about products, check the checkbox, and then press the below button. checkmarks
		FEATURES MG type is using gold-plated particle in electric conductive rubber. Hard gold-plated particles make elastic contact to electrodes, the stable electric connection characteristic is obtained. FEATURES MS type is low resistance-type Inter-Connector using silver particles in the conductive material. This type of connector is superior in contact stability and ideal for connecting between LCD and PCB, PCBs and non-solderable electrical parts. MS type has alternatives of low load type, what is called MS-G and low resistance type with wide zebra, which is MS-Z. FEATURES S-type Inter-Connector consists of alternate layers of conductive and insulation silicone rubber. This compression-type connector makes "random connection" possible with high reliability. This type of connector is applicable for the small-sized display used in watch or camera. FEATURES SS-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which are fitted on both sides. This type is suitable for small- or middle-sized displays. While SS type has translucent supportive solid rubber on the both sides, SG type has pink sponge rubber. FEATURES SG-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which are fitted on both sides. This type is suitable for small- or middle-sized displays. While SS type has translucent supportive solid rubber on the both sides, SG type has pink sponge rubber. FEATURES SP-type Inter-Connector consists of alternate layers of conductive and insulating rubber and of soft rubber insulators fitted on both sides. Since SP type has lower resistance than SS/SG, it is particularly ideal for display with tall height, such as LCD with backlight. FEATURES SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance. FEATURES SEC/SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance. FEATURES L type inter-connectors are used for connecting PCBs to the traces of the LCDs which are on the same side as the viewing side, on the top of the glass. L type inter-connectors are particularly suitable for connecting PCBs to a dot matrix type LCD. All L type inter-connectors are custom made to order using specially designed tools. The dimensions given below are for a typical shape.