The film type heat seal connector based on polyester substrate with conductive line made of either carbon ink, silver ink, or copper foil is ideal inter-connect solution for Display unit and PCB to PCB connection where space is limited.
		To inquire about products, check the checkbox, and then press the below button. checkmarks
		FEATURES JM type Inter-Connectors consists of conductive gold or tin plated copper traces on polyimide film. Adhesive material, in which conductive particle is dispersed, is applied to the terminal in advance. So temporary heatsealing is not necessary, and it can be stored in room temperature for a long time. JM type is available for connecting between FPD (Flat Panel Display) and ZIF (Zero Insert Force) connector, especially for connecting input side of COG (Chip On Glass). FEATURES JC-type Inter-Connector is a heat seal connector that is made up of a polyester film as a substrate, and carbon conductive lines printed on the film. JC-type is coated with an anisotropic conductive adhesive. JC-type is useful for LCD's applications. FEATURES JS-type Inter-Connectors consist of conductive silver/carbon traces printed on polyester film. Adhesive material, in which conductive particle is dispersed, is applied to the traces to heat-seal the connectors to other components. The adhesive type has the altermative of KN or LA. KN-type is a semi thermosetting adhesive and LA-type is a thermosetting adhesive. Due to the heat resistance and peel-strength of LA-type, this type can be used for automotive applications. Besides, the component contains no chlorine, Both KN and LA are compatible with ZIF connector, which is easily inserted and extracted with some force.