TOP>>SS Type | OUTLINE DIMENSIONS | DIMENSIONS AND TOLERANCES | BASIC PROPERTIES | | COMPRESSION CURVES | FEATURES SS-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which are fitted on both sides. This type is suitable for small- or middle-sized displays. While SS type has translucent supportive solid rubber on the both sides, SG type has pink sponge rubber. Item   Unit SS type  Pitch P mm 0.10±0.04   0.18±0.05   0.25±0.05  Length L mm 2.0~20.0±0.15 90.1~150.0±0.6 200.1~275.0±1.0 20.1~90.0±0.65% 150.1~200.0±0.8  Height* H mm 1.0~5.0±0.1   5.1~20.0+0.15/-0.1  Width(standard) W mm 1.0~2.3±0.1   2.4~5.0±0.15  Width of conductive layer Z mm 0.3±0.05(standard)   0.6±0.05(secondary standard) *HW/2 SS-N type, which has non-sticky sides is available on request. Shin-Etsu Inter-Connector has been registered in European Community, TM No. 000299016, and in the United States of America, TM No. 2078941. Item Component Unit SS type  Specific gravity Insulator Conductor Edge insulation part   1.15 1.25 1.10  Shore hardness A Insulator Conductor Edge insulation part ISO7619 (TYPE A) 65~73 63~67 20~25  Compression set * % 12~18  Volume resistivity Insulator Conductor Edge insulation part , cm 1×1014 3~6 8×1013  Dielectric breakdown voltage Insulator Edge insulation part kV/mm 23~27 23~27  Insulation resistance(500V DC) * M 1×10³  Operating temperature range   °C -25~85 *The test is carried out with Shin-Etsu's own method. sample size: 0.10P×50.0L×5.0H×2.6W×0.3Z electrode useds:  0.4mm-width gold-plated vs. no pattern processed gold plated no holder Note) Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee. The quality of the connector, which has been already assembled, is out of guarantee. Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.