|
|
 |
 |
|
FEATURES
MT-type series are anisotropic conductive sheet type, which consists of soft silicone
rubber and of gold-plated metal filaments embedded densely into it. This type
of Inter-Connector is suitable for inspecting and connecting IC packages such
as BGA, QFP or SOP.
Since MT-4X type has 4-time metal density, it can be used to CSP.
Especially, MT series are superrior in transmitting high cycle. |
|
|
|
|
 |
 |
 |
|
| Pich(mm) |
|
Pi : 0.10±0.03×Ps : 0.10±0.05 |
| 4X |
Pi : 0.05±0.03×Ps : 0.05±0.03 |
| Length (mm) |
(mm) |
Max : 50.0±1.0 Min
: 5.0±0.5 |
| Wideth (mm) |
(mm) |
Max : 50.0±1.0 Min
: 5.0±0.5 |
| Thickness (mm) |
(mm) |
0.5+0.05/-0 |
1.0+0.05/-0 |
2.0+0.05/-0 |
| Offset (mm) |
(mm) |
0.25±0.1 |
0.5±0.1 |
1.0±0.1 |
|
|
|
*An optional type whose contact surfaces has been improved in point
of absorptivity.
*MT-SOFT type has no 0.5mm thickness.
*Please consult with us for larger size than 50L×50W.
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016,
and in the United States of America, TM No.2078941. |
 |
 |
| Since metal fillaments are inclined in the direction
parallel to L dim., upper and lower connecting electrodes need "offset". |
|
|
 |
measured by 4-terminal method
The test method: the above-described drawing.
Electrode : Size 0.4mm×0.4mm
gold Plated Electrode (50 patterns)
Test Samples : 0.5mm t (Offset 0.25mm)
1.0mm t (Offset 0.5mm)
2.0mm t (Offset 1.0mm) |
|
|
- A frame is temporarily fixed with a connector.
- A small amount of silicone will remain on the inspected (IC package, etc.,)
connected with MT-type connector.
- When the inspected (IC package, etc.,) with soldered electrodes is pressured and
welded to MT-type connector, the solder can adhere to the metal filament part
of the connector.
- When the inspected (IC package, etc.,) is pressured and welded to MT-type
connector, it can be absorbed to the conncetor.
- Attachments such as dirt, dust and the other alien substances will remarkably
increase the contact resistance of the connector.
- A cross section cut through L direction will be inclined. See the right illustration.
- MT series Operating Temperature Range:-35-100 degree °C
|
|
|
Note)
Every item or numerical value indicated herein is measured by Shine-Etsu and out
of guarantee.
The quality of the connector, which bas been already assmblied, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your
own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
|
