|
|
 |
 |
|
FEATURES
JS-type Inter-Connectors consist of conductive silver/carbon traces printed on
polyester film. Adhesive material, in which conductive particle is dispersed,
is applied to the traces to heat-seal the connectors to other components. The
adhesive type has the altermative of KN or LA. KN-type is a semi thermosetting
adhesive and LA-type is a thermosetting adhesive. Due to the heat resistance and
peel-strength of LA-type, this type can be used for automotive applications. Besides,
the component contains no chlorine, Both KN and LA are compatible with ZIF connector,
which is easily inserted and extracted with some force. |
|
|
|
|
 |
 |
 |
|
| Item |
Unit |
Standard |
| Size L×H* |
mm |
100×150 max. |
| Dimension tolerance |
Length(L)
Height(H) |
mm |
±0.25
H 120±0.25 H>120±0.5 |
| Width of Conductor(Tc) |
mm |
0.1min. |
| Pitch tolerance |
mm |
±0.05 (P<1.0)±0.03 (0.2P0.4)
±0.10 (P 1.0) |
| Accumulative pitch(TP) |
mm |
±0.05 (P0.4,TP100)
±0.10 (P>0.4,TP100) |
| Thickness of base film(T) |
µm |
25 |
| Pitch(P) |
mm |
0.2 |
| Thickness of cover film(option) |
µm |
12 or 25
|
|
|
|
*Max.sizes depend on pitch.
Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016,
and in the United States of America, TM No.2078941. |
 |
 |
|
|
| |
JS-LA Type |
JS-KN Type |
| Base film |
Polyester |
Polyester |
| Conductive lines |
Thermosetting resin silver/carbon ink |
Thermosetting resin silver/carbon ink |
| Adhesive |
Thermosetting synthetic rubber |
Semi-thermosetting synthetic rubber |
| Conductive particles |
Gold plated plastic particles |
Gold plated carbon particles |
| Insulation layer* |
Printed UV setting resin |
Printed themoplastic synthetic rubber |
|
|
|
| *Optional: polyester cover film, polyester stiffner for ZIF connector. |
|
 |
|
|
| Item |
KN Data |
LA Data |
Conditions |
| Conductive resistance |
0.5 / |
0.5/ |
10~30°C, 30~80%RH |
| Insulation resistance |
100M |
100M |
10~30°C, 30~80%RH |
| Peel strength (Initial) |
2.94N/cm |
4.90N/cm |
90°peel, 100mm/min. |
| Strage time |
6 months max. |
6 months max. |
Sealed,0~40°C,RH50% |
|
|
|
 |
|
|
Type
|
JS-LA Type
|
JS-KN Type
|
| Adhesive temperature |
160~190°C |
140~170°C |
| Pressure |
4.0±0.5MPa |
3.5±0.5MPa |
| Time |
6±2 seconds(Adhesive temp.160°C)
|
7±2seconds(Adhesive temp.140°C) |
|
|
|
| *This temperature should be applied only to the bonding area. Surfaces
should be free of dust and contamination. |
|
Note)
Every item or numerical value indicated herein is measured by Shin-Etsu and out
of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practice your
own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
|
