|
|
 |
 |
|
FEATURES
JM type Inter-Connectors consists of conductive gold or tin plated copper traces
on polyimide film. Adhesive material, in which conductive particle is dispersed,
is applied to the terminal in advance. So temporary heatsealing is not necessary,
and it can be stored in room temperature for a long time.
JM type is available for connecting between FPD (Flat Panel Display) and ZIF (Zero
Insert Force) connector, especially for connecting input side of COG (Chip On
Glass). |
|
|
|
|
 |
 |
 |
|
| Item |
Unit |
Standard |
| Size L×H |
mm |
90×90 |
| Dimension tolerance |
Length (L)
Height (H) |
mm |
Min.± 0.1
± 0.25 |
| Width of conductor (Tc) |
mm |
0.14 (FPD side) |
| Pitch tolerance |
|
± 0.03 (0.28 P0.5)
± 0.05 (0.5<P) |
| Accumulative pitch (TP) |
mm |
± 0.05 |
| Thickness of base film |
µm |
25 |
| Pitch (P) |
mm |
0.28 (FPD side)
Pitch of stiffener side depends on connected item |
| Thickness of cover film * |
µm |
25 |
|
|
|
| * Cover film is standard as insulation layer. |
 |
 |
|
|
| Base Film |
Polyimide film |
| Conductive lines |
Gold or tin plated copper |
| Adhesive |
Thermosetting resin |
| Cover film |
Polyester with adhesive |
|
|
|
 |
|
|
| Item |
Data |
Conditions |
| Condutive resistance |
0.1 / |
10~30°C, 30~80%RH |
| Insulation resistance |
100M |
10~30°C, 30~80%RH |
| Peel strength (Initial) |
5.00
N/cm |
90° peel, 100 mm/min. |
| Storage time |
6 months max. |
Sealed, 0~40°C, 50%RH |
|
|
|
 |
|
|
| Adhesive temperature (1) |
160~180°C |
| Pressure |
3.5MPa±0.5 |
| Time(2) |
5±2 sec. |
|
|
|
- This temperature should be applied only to the bonding area.
- Surface should be free of dust and contamination.
- Time (2) means keeping one at reaching the adhesive temperature (1).
- Above "BONDING CONDITION" is not specification. It is only condition
which are got in our test. Your proper condition depends on heatsealing machine,
material of jig, thichness and material of cushion, size and material of adherent,
environment in your process and so on. Evaluation in your process should be necessary
by yourself.
|
|
Note)
Every item or numerical value indicated herein is measured by Shin-Etsu and out
of guarantee.
The quality of the connector, which has been already assembled, is out of guarantee.
Please make sure to see about the purpose/conditions of use and practive your
own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
|
