- Easy assembly/Random connection
- Shin-Etsu Polymer Electronic Device Business Unit will introduce our random
connection technology by Movie.
It realizes the high reliability by many connecting points.
SS/SG type Inter-Connector consist of alternate layers of conductive
and insulating silicone rubber and of rubber insulators with
less stiffness, which are fitted on both sides. This type of
connector is suitable for small- or middle-sized displays.
While SS type has translucent supportive solid rubber on the
both sides, SG type has pink sponge rubber.
(PDF: 1,244KB)
Outline dimensions
Dimension and tolerance
| Item | Unit | SG type | ||
|---|---|---|---|---|
| Pitch | P | mm | 0.10±0.04 0.18±0.05 0.25±0.05 | |
| Length | L | mm | 2.0~20.0±0.15 90.1~150.0±0.6 200.1~275.0±1.0 |
20.1~90.0±0.65% 150.1~200.0±0.8 270.1~300±1.5 |
| Height (1) | H | mm | 1.0~5.0±0.1 5.1~20.0+0.15/-0.1 | |
| Width (standard) | W | mm | 1.2~2.3±0.1 2.4~4.5±0.15 | |
| Width of conductive layer | Z | mm | 0.4±0.05 (standard) 0.8±0.05 (secondary standard) | |
(1) H
W/2
Basic properties
| Item | Component | Unit | SS type |
|---|---|---|---|
| Specific gravity | Insulator | 1.15 | |
| Conductor | 1.25 | ||
| Edge insulation part | 0.6 | ||
| Shore hardness A | Insulator | ISO7619 (type A) |
65~73 |
| Conductor | 63~67 | ||
| Edge insulation part | 17~23 | ||
| Compression set | * | % | 12~18 |
| Volume resistivity | Insulator | Ω/cm | 1 x 1014 |
| Conductor | 3~6 | ||
| Edge insulation part | 8 x 1011 | ||
| Dielectric breakdown voltage | Insulator | kV/mm | 23~27 |
| Edge insulation part | 2.0~2.5 | ||
| Insulation resistance (500V DC) | * | MΩ | 1 x 103 |
| Operating temperature range | ºC | -25~85 |
* The test is carried out with Shin-Etsu's own method.
Compression curves
Sample size: 0.10P x 50.0L x 5.0H x 2.6W x 0.4Z
Electrodes used: 0.4mm-width gold-plated vs.
no pattern processed gold-plated
No holder
Note)
Every item or numerical value indicated herein is measured by Shin-Etsu
and out of guarantee.
The quality of the connector, which has been
already assembled, is out of guarantee.
Please make sure to see about
the purpose/conditions of use and practice your own test. Industrial
ownership like patent doesn't guarantee the usage of the connector.
Technical information
(PDF: 1,244KB)
