- Easy assembly/Random connection
- Shin-Etsu Polymer Electronic Device Business Unit will introduce our random
connection technology by Movie.
It realizes the high reliability by many connecting points.
S type Inter-Connector consists of alternate layers of conductive and insulation silicone rubber. This compression-type connector makes "random connection" possible with high reliability. This type of connector is applicable for the small-sized display used in watch or camera.
(PDF: 1,181KB)
Outline dimensions
Dimension and tolerance
| Item | Unit | 0.05P type | 0.10P type | 0.18P type | 0.25P type | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pitch | P | mm | 0.05±0.03 | 0.10±0.04 | 0.18±0.05 | 0.25±0.05 | ||||||||
| Length | L | mm | 1.0~5.0±0.1 70.1~120.0±0.4 |
5.1~30.0±0.2 120.1~200.0±0.6 |
30.1~70.0±0.3 200.1~300.0±0.8 |
|||||||||
| Height | H | mm | 0.8~5.0±0.1 5.1~25.0+0.15/-0.1 | |||||||||||
| Width without coat | 0.2~5.0±0.08 | |||||||||||||
| Width with coat | W | mm | 0.3~5.1±0.1 | |||||||||||
| Width of insulation coat | Wi | mm | 0.05±0.03 | |||||||||||
* H
W/2
Basic properties
| Item | Component | Unit | 0.05P type | 0.10P type/0.18P type/0.25P type |
|---|---|---|---|---|
| Specific gravity | Insulator | 1.15 | 1.15 | |
| Conductor | 1.15 | 1.25 | ||
| Insulated both sides | 1.15 | 1.15 | ||
| Shore hardness A | Insulator | ISO7619 (type A) |
65~73 | 65~73 |
| Conductor | 60~65 | 63~67 | ||
| Insulated both sides | 65~73 | 65~73 | ||
| Compression set | * | % | 15~20 | 15~20 |
| Volume resistivity | Insulator | Ω/cm | 1 x 1014 | 1 x 1014 |
| Conductor | 1.3 | 3~6 | ||
| Insulated both sides | 1 x 1014 | 1 x 1014 | ||
| Dielectric breakdown voltage | Insulator | kV/mm | 23~27 | 23~27 |
| Insulated both sides | 20~23 | 20~23 | ||
| Insulation resistance (500V DC) | * | MΩ | 1 x 103 |
1 x 103 |
| Operating temperature range | ºC | -25~85 | -25~85 |
* The test is carried out with Shin-Etsu's own method.
Compression curves
Sample size:
0.10P x 20.0L x 2.4H x 2.0W
Sample size:
0.10P x 20.0L x 2.4H x 2.0W
Electrode used:
0.6 width gold-plated vs.
no pattern processed gold-plated
No holder
Note)
Every item or numerical value indicated herein is measured by Shin-Etsu
and out of guarantee.
The quality of the connector, which has been already assembled, is
out of guarantee.
Please make sure to see about the purpose/conditions of use and practice
your own test. Industrial ownership like patent doesn't guarantee
the usage of the connector.
Technical information
(PDF: 1,181KB)
