Shin-Etsu Inter-connector is a preferred inter-connects method for today's flat panel displays. For COG application, GB-U type and MG type connectors offer easier assembly and remarkably low resistance Z-axis connection. As for COB application, our J type heat seal connector offer greater design flexibilities and time proven S and SS type offer superior price advantages.
		To inquire about products, check the checkbox, and then press the below button. checkmarks
		FEATURES SS-type Inter-Connector consists of alternate layers of conductive and insulating silicone rubber and of rubber insulators with less stiffness, which are fitted on both sides. This type is suitable for small- or middle-sized displays. While SS type has translucent supportive solid rubber on the both sides, SG type has pink sponge rubber. FEATURES SEC/SX-type Inter-Connector has lower resistance in the conductive part. This type of connector is suitable for the large LCD display, which is a monochrome STN type. Furthermore, it could be used between PCBs besides LCD because of its much lower resistance. FEATURES JC-type Inter-Connector is a heat seal connector that is made up of a polyester film as a substrate, and carbon conductive lines printed on the film. JC-type is coated with an anisotropic conductive adhesive. JC-type is useful for LCD's applications. FEATURES JS-type Inter-Connectors consist of conductive silver/carbon traces printed on polyester film. Adhesive material, in which conductive particle is dispersed, is applied to the traces to heat-seal the connectors to other components. The adhesive type has the altermative of KN or LA. KN-type is a semi thermosetting adhesive and LA-type is a thermosetting adheseive. Due to the heat resistance and peel-strength of LA-type, this type can be used for automotive applications. Besides, the component contains no chlorine, Both KN and LA are compatible with ZIF connector, which is easily inserted and extracted with some force. FEATURES JM-LA type Inter-Connectors consists of conductive gold or tin plated copper traces on polyimide film. Adhesive material, in which conductive particle is dispersed, is applied to the terminal in advance. So temporary heatsealing is not necessary, and it can be stored in room temperature for a long time. JM-LA type is available for connecting between FPD (Flat Panel Display) and ZIF (Zero Insert Force) connector, especially for connecting input side of COG (Chip On Glass).