Glass substrate to PCB connection PI MG JM [GB-U Type] characteristics GB-U type Inter-Connector is a compression type, which is made up of gold-plated filaments embedded densely in U-shaped sponge silicone rubber. Since the supportive material is made of sponge, connection with fewer loads is possible. GB-U type is highly suitable for connecting between LCD and PCB seen in COG method, or PCBs with high current carrying capacity. Item   Unit GB-U type GB-UA type  Pitch P mm 0.05+0.03/-0.01 0.1±0.05 0.05+0.03/-0.01 0.1±0.05  Length L mm 3.0~20.0±0.4 20.1~40.0±0.6 40.1~50.0±0.8 50.1~60.0±1.0 60.1~100.0±1.2 100.1~180.0±1.5 3.0~20.0±0.4 20.1~40.0±0.6 40.1~50.0±0.8 50.1~60.0±1.0 60.1~100.0±1.2 100.1~180.0±1.5  Height* H mm 1.6~7.0±0.2 7.1~10.0±0.25 2.8~7.0±0.2  Width W mm 1.5~4.8±0.2 1.5~3.0±0.2  Filament diameter   µm 30 40 30 40 *1<H/W4 *GB-UB for high handling performance also available *special orders available on request. standard tools available. Please ask us for details. Shin-Etsu Inter-Connector has been registered in European Community, TM No.000299016, and in the United States of America, TM No.2078941. Item Units VALUES  Contact resistance* Ψ 0.1  Current carrying capacity per filament mA 500  Insulation resistance (500V DC) MΨ 1×10³  Operating temperature range °C -25~85 *The test is carried out with Shin-Etsu's own method. *PCB electrode width: 1.0mm gold plated sample: GB-U type, 0.1P×10.0L×3.0H×3.0W sample: GB-U type, 0.1P×10.0L×3.0H×3.0W PCB electrode: 1.0mm width (gold plated) Note) Every item or numerical value indicated herein is measured by Shin-Etsu and out of guarantee. The quality of the connector, which has been already assembled, is out of guarantee. Please make sure to see about the purpose/conditions of use and practice your own test. Industrial ownership like patent doesn't guarantee the usage of the connector.

All rights reserved. Copyright(C)2005 Shin-Etsu Polymer Co., Ltd.