|
|
 |
| Mounting of electrical parts |
|
|
 |
![Mounting of electrical parts[GB-E Type]](../../images/con_gb_e.jpg) |
[GB-E Type]
characteristics
GB-E-type Inter-Connector is a compression type, which consists of gold-plated
filaments lined in the conductive part and of insulating silicone rubber
on both sides. This type connector makes stable connection possible with
lower resistance.
GB-E type could replace soldering and also be used for PCBs, which need
current capacity. |
 |
 |
  |
|
| Item |
|
Unit |
GB-E type |
| Pitch |
P |
mm |
0.05+0.03/-0.01 |
0.1±0.05 |
0.2±0.05 |
| Length |
L |
mm |
2.0~25.0±0.2
50.1~80.0±0.5
120.1~150.0±1.0
200.1~250.0±1.6 |
25.1~50.0±0.3
80.1~120.0±0.8
150.1~200.0±1.3 |
|
| Height* |
H |
mm |
| 1.0~5.0±0.1 |
5.1~10.0±0.15 |
10.1~20.0±0.2 |
|
| Width |
W |
mm |
|
| Filament diameter |
|
µm |
30 |
40 |
40 |
|
|
Special design is available
on request.
*H W/2
Shin-Etsu Inter-Connector has been registered in European Community, TM
No.000299016, and in the United States of America, TM No.2078941. |
|
 |
|
|
| Item |
Unit |
Values |
| Contact resistance* |
 |
0.1 |
| Current carrying capacity |
mA |
500 |
| Insulation resistance (500V DC) |
M |
1×10³ |
| Operating temperature range |
°C |
-25~85 |
|
|
| *The test is carried out
with Shin-Etsu's own method. |
|
 |
|
|
 |
 |
|
Sample Size 0.1P×50.0L×1.0H×1.0W
Inner diameter of holder:1.0H×1.0W |
Sample Size 0.1P×50.0L×1.0H×1.0W
PCB used: 2.0P, 1.0mm-width gold-plated electrode |
|
Note)
Every item or numerical value indicated herein is measured by Shin-Etsu
and out of guarantee.
The quality of the connector, which bas been already assembled, is out of
guarantee.
Please make sure to see about the purpose/conditions of use and practice
your own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
| |
|
