|
|
 |
| Flat panel inter-connection |
|
|
 |
![Flat panel inter-connection [SS Type]](../images/con_ss_sg.jpg) |
[SS Type]
characteristics
SS-type Inter-Connector consists of alternate layers of conductive and insulating
silicone rubber and of rubber insulators with less stiffness, which are
fitted on both sides. This type is suitable for small- or middle-sized displays.
While SS type has translucent supportive solid rubber on the both sides,
SG type has pink sponge rubber. |
|
 |
  |
|
Item
|
|
Unit |
SS type |
| Pitch |
P |
mm |
0.10±0.04qEnbsp; 0.18±0.05 0.25±0.05 |
| Length |
L |
mm |
2.0~20.0±0.15
90.1~150.0±0.6
200.1~275.0±1.0 |
20.1~90.0±0.65%
150.1~200.0±0.8 |
|
| Height* |
H |
mm |
1.0~5.0±0.1qEnbsp; 5.1~20.0+0.15/-0.1 |
| Width(standard) |
W |
mm |
1.0~2.3±0.1qEnbsp; 2.4~5.0±0.15 |
| Width of conductive layer |
Z |
mm |
0.3±0.05(standard) 0.6±0.05(secondary
standard) |
|
|
*H W/2
SS-N type, which has non-sticky sides is available on request.
Shin-Etsu Inter-Connector has been registered in European Community, TM
No. 000299016, and in the United States of America, TM No. 2078941. |
|
 |
|
|
| Item |
Component |
Unit |
SS type |
| Specific gravity |
Insulator
Conductor
Edge insulation part |
|
1.15
1.25
1.10 |
| Shore hardness A |
Insulator
Conductor
Edge insulation part |
ISO7619
(TYPE A) |
65~73
63~67
20~25 |
| Compression set |
* |
% |
12~18 |
| Volume resistivity |
Insulator
Conductor
Edge insulation part |
 ,
cm |
1×1014
3~6
8×1013 |
| Dielectric breakdown voltage |
Insulator
Edge insulation part |
kV/mm |
23~27
23~27 |
| Insulation resistance(500V
DC) |
* |
M |
1×10³ |
| Operating temperature range |
|
°C |
-25~85 |
|
|
| *The test is carried out with Shin-Etsu's own method. |
|
 |
|
|
|
sample size: 0.10P×50.0L×5.0H×2.6W×0.3Z
| electrode useds: |
0.4mm-width gold-plated vs.
no pattern processed gold plated
no holder |
|
|
Note)
Every item or numerical value indicated herein is measured by Shin-Etsu
and out of guarantee.
The quality of the connector, which has been already assembled, is out of
guarantee.
Please make sure to see about the purpose/conditions of use and practice
your own test.
Industrial ownership like patent doesn't guarantee the usage of the connector. |
| |
|
